The carbon fibre cable comb 6-pin in CLOSED. The carbon fibre cable comb in CLOSED version is made to hold your cables absolutely secure. You can only insert the sleeved cables into the cable comb while one end is not in a connector.
These combs are CNC milled out of solid 3mm carbon fibre sheets and hand finished. They are up to 15 times stronger than acrylic while also being lighter and extremely stiff. These combs will not break or flex saving you the hassle of recombing your cables due to breakages when installing the cables in your case. The combs have a matte finish on all sides so as not to take away from the rest of your build.
The CLOSED cable comb holes have a diameter of 3.8 mm, which naturally limits your sleeved cables to an outer diameter of 3.8 mm in order to fit into the cable comb. MDPC-X cable sleeving adds 1.1 mm to 1.2 mm to the outer diameter of your wire. Combined with MDPC-X 15 AWG wire (2.50 mm OD), you have a perfectly matching diameter of ~3.7 mm. Combined with MDPC-X 17 AWG wire (2.0 mm OD), you have a the minimum necessary diameter of 3.2 mm. With standard wire sizes found on today’s power supplies (16 AWG or 18 AWG between 2.1mm and 2.6mm) in combination with MDPC-X cable sleeves, you will also be in the needed diameter range for our cable combs.